 |
For
interior walls |
|
For
exterior walls |
|
Reinforcing
fabric |
|
|
| |
|
| |
| |
| 20 % cost savings
in resin consumption |
|
»Lean
is beautiful« – with the super-lean Vitrulan®
glass reinforcement mesh
W 3003 you can save a lot of money,
since 20 % less resin is required for the reinforcement
of your valuable marble slabs! |
|
| |
| Simple processing
due to unique characteristics |
|
Optimized
for rigorous use in the reinforcement of marble
slabs, the reinforcement mesh W 3003
has the ideal level of thickness to ensure excellent
processing characteristics. Fibreglass mesh is
easy to apply: it can be laid flat and smooth
on marble slabs, thus enabling even distribution
of resin. It does not warp or streak easily. |
In
case of machine application, the special surface
structure of this glass reinforcement mesh offers
an optimum holding surface for pneumatic lifting
devices. The flexible fabric widths classified
in 100-mm stages from 1000 to 2000 mm give you
a perfect result even where unconventional processing
widths are involved. |
|
 |
|
| |
| Up to 20 % more strength,
for optimum stone protection |
|
The
strength and expansion values of the glass reinforcement
mesh W 3003 speak for themselves:
In spite of its relatively low thickness, this
special mesh guarantees up to 20 % higher strength
both in the longitudinal as well as both in the
transverse direction, in comparison to wovan-like
structures - even in the case of sudden application
of force! The balanced and uniform appearance
ensures a homogeneous product that is only visually
attractive, but also guarantees the immediate
linear absorption of force. This optimises the
reinforcing action and thereby ensures that precious
marble retains its attractiveness in the long-term
even with fast installation and adverse transport
conditions. |
|
| |
| The advantages at
a glance: |
 |
up
to 20 % less resin consumption due to very
thin mesh fabric |
|
uniform,
balanced appearance |
|
up
to 20 % higher strengths in comparison to
similar reinforcing fabrics |
|
easy
installation thanks to flat and smooth fabrics |
|
flexible,
with processing widths of 1000 – 2000
mm |
|
optimum
force absorption in the longitudinal and transverse
direction |
|
high
diagonal stability |
|
does
not break easily |
|
|
|
|
Technical
characteristics |
|
|
1.0
x 2.4 mm,
alternating with 4.0 x 2.4 mm |
|
| |
1000
mm (+/- 10 mm)
1100 mm (+/- 10 mm)
1200 mm (+/- 10 mm)
1300 mm (+/- 10 mm)
1400 mm (+/- 10 mm)
1500 mm (+/- 10 mm)
1600 mm (+/- 10 mm)
1700 mm (+/- 10 mm)
1800 mm (+/- 10 mm)
1900 mm (+/- 10 mm)
2000 mm (+/- 10 mm)
Tapes in 295 mm und 320 mm width
(or against request) |
|
| |
|
Weight
per sqm
(DIN 53 854) |
|
|
|
|
Mechanical
characteristics |
|
Maximum
tensile load
(DIN EN ISO 13 934-1) |
|
| Warp: |
800 N/5
cm |
| Weft: |
800 N/5
cm |
|
|
Maximum
tensile strength
(DIN EN ISO 13 934-1) |
|
| Warp: |
≤ 4,0
% |
| Weft: |
≤ 4,0 % |
|
|
| The details contained
in this Technical Information Sheet reflects our
level of knowledge at the time of puplication. We
expressly reserve the right to make changes to keep
step with technological advances. |
|
|
|
|
