Glass déco fabrics | Reinforcing fabrics | Textile glass technology | About Us | News back   
For interior walls
Plaster reinforcing fabrics
Universal fabric
Reinforcement stripes
Reinforcement for liquid coatings
For exterior walls
EIFS
External rendering fabric
Panzer fabric
Edge profile
Reinforcement for liquid coatings
Reinforcing fabric
Marble reinforcement
Compounds
Surface heating systems
Interior areas /Acoustic plates
Floor coatings
Email
 
  Vitrulan - WDVS-Gewebe
 
 
 
Protection in all climates
Vitrulan® EIFS-fabric play the crucial role in exterior insulation finishing systems (EIFS).
They ensure a reliable reinforcement for EPS and mineral wool sheets, in thin, medium as well as thick-coat systems.
Optimum for use in mineral as well as dispersion systems.
The high tensile strength of the fabric in the long-term allows it to easily withstand tensions that arise in the facade, for example due to extremely short-term temperature variations and air humidity.
The high quality synthetic coating of the glass yarn provides reliable protection against alkaline influences from the adhesive and the plaster.
 
Vitrulan® EIFS-fabric
Safety from a supplier who has already installed hundreds if millions of square meters of fabrics in facades over a period of more than 25 years
reliable reinforcement that will endure for many years
resistant to damage by alkalis even in case of high levels of moisture and high cement content in the plaster
optimally suitable for mineral and dispersion plaster systems
fully satisfies the values of ETAG 004 and the IfBt Directive
VITRULAN® has been a Member of the Fachverband Wärmedämmverbundsysteme e.V. (Registered Professional Association for Exterior Insulation Finishing Systems) and therefore offers state-of-the-art technology
 
You can choose between:
different degrees of hardness for specific processing requirements
also available in self-adhesive versions
special coatings to conform to high fire safety requirements
special colouring
special imprint
special width or length if required
 
SD. 4418 G
SD. 4420 G
SDA. 4412 K
Weight around
150 g/m²
160 g/m²
160 g/m²
Mesh width around
4.0 x 5.0 mm
4.0 x 4.0 mm
6.0 x 6.0 mm
Tensile strength - warp/weft in N/5 cm:
2000/1800
2000/2000
1900/2200
Alkali resistance
Residual strength as per EOTA-Testing method
> 50 %
All VITRULAN® EIFS fabrics are continuously tested according to ETAG 004.
Vitrulan has obtained CE certification through participation in the 2plus system.
copyright by Vitrulan
 
us  Products | Email | Imprint | Contact | Home
Copyright © 2006/2007 VITRULAN® - Textilglas GmbH - Bernecker Straße 8 - D-95509 Marktschorgast - Germany and their licencees. All rights reserved.